Ezwatch EZ-EYE Bedienungsanleitung PDF herunterladen

www.ezwatchstore.com

EZ-EYE User Guide – Setup,

Configuration, Usage

External Configuration -

The EZ-EYE unit has two external dip switches which control

the video mode and recording mode of the unit. These switches should be configured to the

desired settings prior to connecting and powering on the unit.

NTSC – PAL : This switch controls the video format the unit is displaying in. For North American

television sets the ‘NTSC’ mode is used. PAL mode is used primarily in European and African

sets. If the wrong video mode is used then you may experience poor video quality, loss of color,

off-center images or other similar video issues.

Full Stop – Overwrite : This switch controls the recording mode of the camera. When set to

‘Full Stop’, the unit will record until the memory is full then stop recording until it is cleared. The

unit will not record until the memory has been erased using the camera menu. When set to

‘Overwrite’, the camera will record constantly and when the memory is full it will overwrite the

oldest images with new ones.

Once the EZ-EYE unit has been configured using the dip switches , configuration must be done

within the camera menu. To access the menu, you must first connect the camera to a television

set using the provided RCA video cable. Simply run the cable from the Video Out port on the

back of the camera, to the yellow Video In port on your Television. After that, switch your

camera on. If you do not see an image from the camera then you may need to change the input

on your Television (Most commonly done using a ‘Input’, ‘Source’, or ‘TV/VCR’ button on your

remote control) until you do. See your TV’s user manual for more information on changing your

TV’s input.

Live View Display –

The image that appears on the screen when the camera is

connected to your TV is the Live View. On this screen you can see exactly what the camera

sees. Across the top and bottom of the display are translucent bars which display information

about the system. Across the top the current date and time will be shown. The format that this

date and time appears in can be configured within the camera’s menu.

At the bottom of the screen you will see the recording bar. This will have the following items

displayed :

1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - Configuration, Usage

www.ezwatchstore.com EZ-EYE User Guide – Setup, Configuration, Usage External Configuration - The EZ-EYE unit has two external dip switches which c

Seite 2 - Camera Menu –

www.ezwatchstore.com Recording Indicator – When the camera is recording, you will see a white circle on the bottom left, with a rotating red section

Seite 3

www.ezwatchstore.com SET MOTION DETECT – This option allows you to configure the sensitivity of the Motion Detection of the unit. On the screen you

Seite 4 - Recording –

www.ezwatchstore.com Schedule Record -> Continue Record – This option allows you to enter a schedule for the camera to record constantly and not

Seite 5 - Playback –

www.ezwatchstore.com settings and scheduled time is controlled within the ‘Schedule Record -> Continue Record’ section of the camera menu. Whenev

Seite 6 - Quality Comparison –

www.ezwatchstore.com To exit playback and return to the ‘search’ screen, press the Stop (up) button. To exit the search screen and return to the men

Seite 7 - Recording Times –

www.ezwatchstore.com Recording Times – All times based on constant recording. Recording times on Motion Detection may vary depending on conditions.

Kommentare zu diesen Handbüchern

Keine Kommentare

Ezwatch EZ-EYE Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Ezwatch EZ-EYE herunter. EZWatch EZ-EYE User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Video Ezwatch EZ-EYE